Loctite EA 9492 High Heat-Resistant Structural Epoxy
HUF 15,113
VAT included
Delivery in 3-4 business days
Kétkomponensű A&B, nagy hőállóságú(+180C), univerzális epoxi (2:1) keverési aránnyal
Data Safety policy
We handle your data confidentially and store it securely!
Delivery Policy
The delivery is carried out by a third party, so the charges may vary.
Warranty policy
Our company provides a warranty for most of our products. For more information, click here!
LOCTITE EA 9492 Structural Adhesive - 50ml
A high-strength, two-component epoxy resin with excellent gap-filling properties, fast curing, and high heat resistance. It is ideal for bonding ceramics and also adheres well to steel, aluminum, and thermoplastic materials.
Benefits:
- High strength
- Good gap-filling
- Fast curing
- Excellent heat resistance (+180°C)
- Excellent chemical resistance
- Bonds to a variety of materials
- Low gas emissions
Suitable for bonding:
- Ceramics
- Steel
- Aluminum
- Thermoplastic materials
Instructions for use:
Before bonding, thoroughly clean the surfaces with SF 7063 cleaner. Insert the cartridge into the Loctite 96001 dispensing gun and gently press the plunger. Remove the cartridge cap and screw on the mixing nozzle. Do not use the first 1-2 cm of the product from the mixing nozzle for bonding. Then, apply the desired amount of adhesive to one surface and fit the two parts together. Any excess adhesive can be removed with a solvent. Do not load the bonded parts until the adhesive has reached its maximum strength.
This product can be applied using manual "hand mixing" or the "Loctite 96001" dispenser gun with mixing nozzle.
| Technology | 2K epoxy |
| Color after mixing | White |
| Viscosity | 30 Pa*s |
| Mixing ratio by volume | 2/1 |
| Pot life | 15 minutes |
| Curing time | 75 minutes |
| Operating temperature | Between -55°C and +180°C |
| Tensile strength | 31 N/mm² |
| Peel strength | 1.6 N/mm |
5 Items
You might also like
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
